All hardware options are made from Stainless Steel, with the exception of ‘Square’. The leather is cut to 1 inch wide and layered up is around 1/2 inch thick. See below for more details and length on each choice:
SQUARE: Fits around 8 keys on the pin. Measurement from each end of the hardware tips: 5.25 inches. To add or remove keys you will need a small pointy object such as a mini screw driver to push in the spring loaded pin on one side. Then push the pin out, load your keys, then push the pin back down and replace. It might take a little finagling, but it’s very secure!
CLIP: Placing a clip at the end allows for easy unclipping of your own keyring. Will clip onto any ring of keys, or perhaps other items. Measurement from each end of the hardware tips: 9.75 inches.
Please note that we only use the best Full-Grain leather in our shop and it is tooled by hand. This means there may be the occasional natural scar or marking that occurred during the cow’s lifetime, as well as some subtle tooling marks. It’s just a testament to the hand-worked leather. Colors may vary slightly from the photos due to the dye process used.